Table of Contents
Advertisement
POWER TAKE- -OFF SPEED SELECTION
To select power take--off speeds, proceed as
described below:
--
lift the spring--loaded collar (2) fig. 12 upward;
--
position the lever (1) fig. 12 to the required
speed, as indicated by the decal at the base of
the lever. Release the spring--loaded collar.
2- -SPEED POWER TAKE- -OFF
(OPTIONAL)
For 540/1000 rev/min versions an interchangeable
PTO shaft is supplied.
The speed can be selected simply by replacing
splined output shaft (2) fig. 13.
To replace splined output shaft fig. 13 remove the
3
bolts (1) and fit the 1
/
8
for a speed of 540 rev/min, or the 1
21--splined shaft for a speed of 1000 rev/min.
CAUTION
Use the power take--off at 1000 rev/min only after
fitting the appropriate 1
from the accessories kit.
3--10
SECTION 3 - - FIELD OPERATIONS
in. diameter six--splined shaft
3
/
in. diameter
8
3
/
in. 21--splined output shaft
8
TRE0002C
1
2
1
TRE0809A
1
2
12
1
13
Advertisement
Table of Contents
