Table of Contents
Advertisement
WHEEL TRACK ADJUSTMENT FRONT
WHEEL TRACKS, 4- -WHEEL DRIVE AND
REAR WHEEL TRACKS, 2 AND 4- -WHEEL
DRIVE
The front wheels can be fitted with the concave
surface of the disc facing inwards or outwards
(see fig. 48).
Tracks of different sizes can be obtained using both
these disc positions, as illustrated in figs. 49 and 50.
When adjusting the wheel track, ensure that the
points of the tyre treads are still facing the direction
of forward travel, indicated by an arrow on the tyre
walls.
Always check that the front and rear wheels are
symmetrically aligned in relation to the tractor's
longitudinal axis.
Front wheels 4WD
The tightening torque of the hub disc locknuts is 255
Nm -- 26 kgm (187.98 lb.ft), and the torque of the rim
disc locknuts is 216 Nm -- 22 kgm (159.06 lb.ft).
Rear wheels 2/4WD
The tightening torque of the hub disc locknuts is 255
Nm -- 26 kgm (187.98 lb.ft), and that for the rim disc
locknuts is 245 Nm -- 25 kgm (180.75 lb.ft).
Always check that the front and rear wheels are
symmetrically aligned relative to the tractor's
longitudinal axis.
3--34
SECTION 3 - - FIELD OPERATIONS
WARNING
Select the appropriate rear track before changing the
front one.
DANGER
When removing the wheels, proceed with extreme
caution, use suitable means to lift the tractor and
specified equipment to move heavy parts.
48
Advertisement
Table of Contents
