Table of Contents
Advertisement
SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
TRACTOR POWER TAKE- -OFF GUARD - -
Fig. 4
The guard (1) covers the power take--off shaft.
To facilitate shaft replacement, loosen screws (2)
and remove the guard.
CAUTION
The guard must never be removed when the tractor
is being used and must never be modified.
POWER TAKE- -OFF SHAFT SAFETY CAP - -
Fig. 5
The cap (1) must always be fitted on the power
take--off shaft when it is not connected to an
implement.
Replace it correctly when the power take--off is not
in use.
CAUTION
Check that all guards and covers are correctly fitted
before using the tractor.
PIVOTING POWER TAKE- -OFF GUARD - -
Fig. 6
The guard (1) protects the power take--off shaft.
NOTE: To facilitate connection of the tractor
transmission shaft / implement, lift the guard (1).
Once connected, return the guard to the safety
position.
CAUTION:
The guard must never be
removed when the tractor is being used and
must never be modified.
2
TRE0016A
TRE0016A
TRE0801A
1
4
1
5
1
6
2--3
Advertisement
Table of Contents
