Table of Contents
Advertisement
REPLACING
THE
BULBS - - Fig. 83
WARNING
When handling halogen bulbs never touch the bulb.
Touch only the metal part.
If the bulb comes into contact with your fingers, it will
reduce the intensity of the light emitted and
adversely affect service life. In the event of contact,
clean the bulb with a cloth soaked in alcohol and
leave to dry.
Replace blown bulbs as follows:
1. Unscrew the connector (1);
2. Remove the rubber protector (2);
3. Unclip the retaining spring (3) and unscrew the
bulb anti--clockwise.
Replace the old bulb with another halogen one of the
same power (55/60 W).
REPLACING THE REAR SIDE, STOP AND
INDICATOR LIGHT BULBS - - Fig. 84
Remove the transparent cover (1), press the
defective bulb in, twist a
remove it. Replace it with a bulb of the same power:
(2) Indicator light -- 21 W;
(3) Brake lights and side lights -- double filament,
21 W / 5 W.
NOTE: The transparent amber cover must be fitted
over the outer edge of the mudguard.
REPLACING THE FRONT SIDE, STOP AND
INDICATOR LIGHT BULBS - - Fig. 85
Remove the transparent cover (1), press the
defective bulb in, twist a
remove it. Replace it with a bulb of the same power:
(2) Indicator light -- 21W;
(3) Side lights -- 5W.
NOTE: The transparent cover must be fitted with the
amber section above the clear section.
4--38
SECTION 4 - - LUBRICATION AND MAINTENANCE
FRONT
HEADLIGHT
1
/
turn anti--clockwise and
4
1
/
turn anti--clockwise and
4
2
3
1
83
84
85
Advertisement
Table of Contents
