Table of Contents
Advertisement
User manual
1.- Precautions
The Receiver you have just purchased has been manufactured to international safety
standards.
We recommend you to read the following safety tips carefully
ALIMENTATION:
175 - 250 V~ 50/60 Hz.
OVERLOAD:
Do not overload points, extension cords or adaptors to avoid fire and electric shock
risks.
LIQUIDS:
Do not expose the Receiver to water leakage or spray.
Do not place objects or vessels containing liquids on the equipment or near it.
SMALL OBJECTS:
Avoid the proximity of small metal objects to the equipment. These could slip
through the ventilation slots of the Receiver, causing it serious damage.
CLEANING:
Disconnect the Receiver from the power source before cleaning.
Use a soft rag, slightly moistened in water (without detergent) to clean the outside of
the Receiver.
VENTILATION:
Place the Receiver in a well-ventilated area so that the slots are not blocked in any
way. Avoid exposure to the sun, to other sources of heat or flames.
Do not place on top of other equipment.
CONNECTIONS:
Make only the recommended connections, in order to avoid possible damage to the
equipment.
CONNECTIONS TO TV/VCR:
Turn off the Receiver before connecting or disconnecting to a TV set or a VCR.
NOT DOING THIS may damage the TV or the VCR.
LOCATION:
Locate the Receiver in an interior room, safe from electrical discharges, rain or direct
sunlight.
Install the Receiver in horizontal position
WARNING
RISK ELECTRICAL SHOCK
DO NOT OPEN
IN ORDER TO REDUCE RISK OF ELECTRICAL DISCHARGE, DO NOT REMOVE THE LID.
THERE ARE NO USER-REPAIRABLE PARTS INSIDE THE MACHINE.
FOR ANY REPAIRS, CONTACT A QUALIFIED TECHNICIAN
This symbol indicates that "voltage levels are dangerous" within the product, and
that this presents a risk of electric shock or other personal harm.
This symbol indicates that there are important instructions for the use of this product
4
"DVB-T 7151"
> 50°C
> 80 %
< 5°C
Advertisement
Table of Contents
