Osd Setting - Televes RSD-7115 User Manual

User Manual
- Timer Service.- Select the type of service you want the timer to
perform. You can select a TV program a Radio program, or the display
of a Message or a reminder. The selection is made by pressing the
V+/V- buttons.
- Wakeup Channel.- Select the channel you want for the timer. For the
purpose, press button OK on this option, and then using buttons CH
CH , V+ or V-, select the channel from the popup list. Confirm your
channel selection by pressing the OK button again.
- Wakeup Message.- Select the message with which you want to activa-
te the receiver from among the options: "Birthday", "Anniversary" or
"General", using the V+/V- buttons.
This option will be available if you select the "Message" option on the
"Timer Service" Section.
- Wakeup Date.- The current date will appear by default. You can modify
this date using the remote control number keyboard (0 .... 9).
- On Time.- Current time display appears by default. Using the remote
control number keyboard (0 .... 9), enter the starting time of the event.
- Duration.- Using the remote control number keyboard (0 .... 9), enter
the estimated duration time of the event.
Repeat the same steps if you wish to program other events.
If you wish to eliminate any of these events, you can do so by placing
yourself on its number, and the in "Timer Mode", select the option "Off".
To memorize data and leave the menu, press the EXIT button.

9.5.- OSD Setting

OSD Timeout
This allows you to define the onscreen time of the information window
(1 to 10 seconds).
The selection can be made by pressing the V+/V- buttons.
OSD Transparency
This allows you to define the degree of menu transparency on a scale
from 10% through 20%, 30%, 40% and Off.
The selection can be made by pressing the V+/V- buttons.
Load Default OSD Setting
This option allows you to recover the original OSD Setting. Press button
OK on the option.
To leave the menu, press the EXIT button.
,
53
"RSD - 7115"