Removing The Rear Cover; Removing The Scanner Unit; Removing The Left Cover; Removing The Operation Panel Unit - Canon LaserBase MF3220 Series Service Manual

2) Remove the right cover [1].
- 2 screws [2]
[1]
[2]

3.2.3.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
[1]
2) Remove the left cover [1].
- 2 screws [2]

3.2.3.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[1]
F-3-118
F-3-119
F-3-120
[1]
[2]
F-3-121
[4]

3.2.3.6 Removing the Scanner Unit

1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
[1]
0012-1618
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
[1]

3.2.3.7 Removing the Operation Panel Unit

1) Detach the flat cable cover, and remove the flat cable [1] from the core [2].
- 2 screws [3]
0012-1619
[2]
[4]
[1]
[3]
F-3-122
[3]
[4]
[5]
[2]
F-3-123
[2]
F-3-124
Chapter 3
0012-1620
0012-1624
3-19