Removing The Right Frame; Removing The Plate; Removing The Left Frame; Removing The Power Supply Shield Plate - Canon LaserBase MF3220 Series Service Manual

Chapter 3
[1]

3.5.1.8 Removing the Right Frame

1) Remove the right frame [1].
- 3 screws [2]

3.5.1.9 Removing the Plate

1) Remove the plate [1].
- 1 connector [2] on the ECNT board
- 3 screws [3]

3.5.1.10 Removing the Left Frame

1) Remove the left frame [1].
- Remove the cable [2] from the guide.
- 3 screws [3]
3-26
[3] [2]
[1]
F-3-161
[2]
[1]
[2]
F-3-162
[1]
[2]
[3]
F-3-163

3.5.1.11 Removing the Power Supply Shield Plate

1) Remove the cable from the cable guide.
- 1 connector [1]
[1]
0012-1642
2) Remove the power supply shield plate [1].
- 9 screws [2]
0012-1643
[1]

3.5.1.12 Removing the Power Supply Assembly

1) Remove the 3 screws [1]. (The external cover is omitted from the
illustration below to show the instructions clearly.)
2) Remove the four connectors [2] as well as the flat cable [3] on the ECNT
board.
After having removed the flat cable [3], store it inside the unit to protect it
from damage.
0012-1645
[3] [1]
[2]
F-3-164
F-3-165
[1]
F-3-166
[3]
0012-1646
[1]
0012-1647