Removing The Left Cover; Removing The Rear Cover; Removing The Scanner Unit; Removing The Top Cover - Canon LaserBase MF3220 Series Service Manual

2) Remove the right cover [1].
- 2 screws [2]
[1]
[2]

3.6.2.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
[1]
2) Remove the left cover [1].
- 2 screws [2]

3.6.2.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[1]
F-3-274
F-3-275
F-3-276
[1]
[2]
F-3-277
[4]

3.6.2.6 Removing the Scanner Unit

1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
[1]
0012-1751
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
[1]

3.6.2.7 Removing the top cover

1) Free the 2 claws [1], and remove the top cover [2].
- 2 screws [3]
0012-1752
[2]
[4]
[1]
[3]
F-3-278
[3]
[4]
[5]
[2]
F-3-279
[2]
F-3-280
Chapter 3
0012-1753
0012-1754
3-43