Paper Delivery Sensor; Removing The Cassette; Removing The; Removing The Right Cover - Canon LaserBase MF3220 Series Service Manual

Chapter 3

3.1.12 Paper Delivery Sensor

3.1.12.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.1.12.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
[3]
[1]

3.1.12.3 Removing the right cover

1) Remove the 2 screws [1] on the right cover.
2) Remove the right cover [1].
- 2 screws [2]
3-14
[3]
[2]
[1]
F-3-85
[3]
[2]
F-3-86
[1]
F-3-87
[1]
[2]

3.1.12.4 Removing the left cover

1) Remove the 2 screws [1] on the left cover.
0012-1547
0012-1548
[1]
2) Remove the left cover [1].
- 2 screws [2]
0012-1550

3.1.12.5 Removing the rear cover

1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
[4]

3.1.12.6 Removing the Power Supply Shield Plate

1) Remove the cable from the cable guide.
- 1 connector [1]
F-3-88
F-3-89
F-3-90
[2]
[4]
[1]
[3]
F-3-91
0012-1551
[1]
[2]
0012-1552
0012-1553