Input Configuration; Adjusting And Changing The Settings; System Configuration; Initial Setup - Sony LMD-2765MD Instructions For Use Manual

Input Configuration

Port A Input Select
Port B Input Select
Input Name
Auto Input Select (LMD-2760MD only)
Power Supply
HDCP Setting

System Configuration

Control Lock
OSD Setting
Power On Setting
Power Save
Serial Remote
Ethernet Setting
Custom Button
Panel Display

Initial Setup

Language
Port A Input Select
Port B Input Select
Pattern Skip
PIP/POP
Custom Button
Auto Input Select (LMD-2760MD only)
Preset
Load User Setting
Save User Setting
User Name
Load Default
Adjusting and changing the
settings
Color Tone Adjustment menu
The Color Tone Adjustment menu is used to adjust
picture quality for each input.
You need to use the measurement instrument to adjust
the color temperature.
Recommended: Konica Minolta color analyzer CA-310
Submenu Setting
Gamma Select the appropriate gamma mode
from among "1.8," "2.0," "2.2,"
"2.4," "2.6," "DICOM."
"DICOM" is for reference, not
diagnostic, purposes only.
Phase Adjusts color tones. The higher the
setting, the more greenish the
picture. The lower the setting, the
more purplish the picture.
Chroma Adjusts color intensity. The higher
the setting, the greater the intensity.
The lower the setting, the lower the
intensity.
Brightness Adjusts brightness.
Contrast Adjusts contrast.
*
A.I.M.E. Select from among "Off," "On"and
"Check Mode."
When you select "Check Mode,"
two images of A.I.M.E. being
"Off" / "On" are displayed.
* A.I.M.E.: Enables better image
Note
When the input connector is set to
VIDEO or S VIDEO, A.I.M.E.
cannot be selected.
A.I.M.E. Structure Adjust the level of contrast.
A.I.M.E. Color Adjust the level of color.
reproduction and display.
Adjustment Using the Menus
21