6.12 Default settings (reset) of the parameters
You can reset the standard (default) settings in the telephone so that they are the
same they were when you bought the telephone. You need the PIN code to do
this.
To restore the default settings, do the following:
The default settings are:
Keypad
not locked
Key clicks
active
Speaker volume
level 3
Ringer melody
1
Ringer volume
5
Selection base unit
automatic
Flash time
LONG(250ms)
1 Press the Programming key
2 Press the Up or Down key repeatedly until 'SETTING' appears on the display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 Enter your PIN code. Press the Programming key
.
.
repeatedly until 'RESET' appears on the
. 'PIN' appears on the display.
.
.
24
Model:DDP-300