Turning Key Click On/Off; Locking The Key Pad; Setting The Speaker Volume - Denver DDP-300 User Manual

6.2 Turning key click on/off

You can set the telephone to make a sound whenever you press a key.
1 Press the Programming key
2 Press the Up or Down key
the display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 The current status appears on the display: - 'CLICK ON': turn on key click or
'CLICK OFF': turn off key click
7 Press the Up or Down key
8 Press the Programming key

6.3 Locking the key pad

If you lock the alphanumeric keypad, it is impossible to dial a telephone number.
Only the Programming key
displayed on the display.
1 Press the Programming key
2 Press the Up or Down key
the display.
3 Press the Programming key
4 KEY LOCK' appears on the display.
5 Press the Programming key .
6 The current status of the keypad appears on the display:
- 'LOCK': the keypad is locked or 'UNLOCK': the keypad is not locked
7 Press the Up or Down key
8 Press the Programming key

6.4 Setting the speaker volume

Use the Volume/Ringer key VOL to set the volume of the speaker (handset).
You can choose from 5 levels. The telephone is set to level '3' by default.
During a call, you can change the volume as follows:
1 Press the Volume/Ringer key VOL .
2 The volume level currently set appears on the display.
.
repeatedly until 'KEY SETUP' appears on
.
repeatedly until 'KEY CLICK' appears on the
.
to make your selection.
to confirm your selection.
can still be used. 'KEY LOCKED' will be
.
repeatedly until 'KEY SETUP' appears on
.
to make your selection.
to confirm your selection.
19 Model:DDP-300