Setting The Ring Volume Level; Setting The Melody - Denver DDP-300 User Manual

3 Use the number keys to set the desired level (1-5).
4 Press the Volume/Ringer key VOL to confirm your selection.
Note : You have 8 seconds to set the desired volume; if you do not, the
telephone returns to standby mode and the volume remains unchanged.
6.5 Setting the ring volume level on the handset
If you want, you can change the ring volume of an incoming call. You have 10
levels. You can set the ring volume of internal and external calls separately so
you can hear a difference.
If you select level '0', the symbol
hear the phone ring when an external call is received (you still hear it ring for
internal calls). Level '9' is the highest level. The telephone is set to level '5' by
default.
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 Press the Up or Down key
display.
7 Press the Programming key
8 The current volume level used appears on the display.
9 Enter a number between 0 and 9 to select the desired ringer volume. Use the
number keypad to do this.
10 Press the Programming key
6.6 Setting the ring melody on the handset
If you want, you can change the ringer melody for an incoming call. You have 9
ringer melodies to choose from (1-9). By default, the ringer melody is set to '5'.
1 Press the Programming key
2 Press the Up or Down key
display.
appears on the display and you no longer
.
repeatedly until 'RING SEL' appears on the
. 'EXTERNAL' appears on the display.
repeatedly until 'INTERNAL' appears on the
.
repeatedly until 'VOLUME' appears on the
.
to confirm your selection.
.
repeatedly until 'RING SEL' appears on the
20 Model:DDP-300