Removing Subscription Of A Handset To A Base Unit; An Internal Call: Calling Another Handset; Receiving An Internal Call - Denver DDP-300 User Manual

8.2 Removing subscription of a handset to a base unit

It is possible to cancel subscription of a handset to a base unit. You would do this
if a handset is damaged and has to be replaced by a new one.
Caution: You can only cancel subscription of another handset, not the handset
you are using to do the cancellation procedure.
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 Enter your 4-digit PIN code in (default PIN code is '0000'). Use the number
keypad.
7 Press the Programming key
8 Dial the number of the handset you want to remove (1 -5). Use the number
keypad.
9 Press the Programming key
10 'REMOVE HS' appears on the display and the handset is removed

8.3 An internal call: calling another handset

This function only works if multiple handsets are subscribed to the base unit !
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Dial the number of the handset you would like to call.
5 After finishing your call, press the Line key
back on the base unit.

8.4 Receiving an internal call

This function only works if multiple handsets are subscribed to the base unit!
1 Press the Line key to accept the internal call.
2 During the call, 'INT', the handset number of the caller and the symbol
.
repeatedly until 'SETTING' appears on the
.
repeatedly until 'REMOVE HS' appears on the
. 'PIN' appears on the display.
. 'REMOVE HS' appears on the display.
.
.
repeatedly until 'INTERCOM' appears on the
. 'INT' appears on the display
to hang up or put the handset
28 Model:DDP-300