Redialling The Last Number Dialed; Redial One Of The Last 5 Numbers Dialed; Turning Off The Microphone (Mute); Activate/Deactivate Handsfree Function - Denver DDP-300 User Manual

4.6 Redialling the last number dialled
1 Press the Line key .
2 The Line/Charge indicator
the Call symbol appear on the display. You will hear the dial tone.
3 Press the Redial key . The number you last called is dialled automatically
without having to re-enter the number.
4.7 Redial one of the last 5 numbers dialled
1 Press the Redial key . The number you last called appears on the display. If
you would like to dial one of the last 5 numbers dialled, press the Redial key
a few times until the desired number appears on the display.
2 Press the Line key . After finishing your call, press the Line key
hang up or put the handset back on the base unit.

4.8 Turning off the microphone (mute)

It is possible to turn off the microphone during a call by pressing the Delete/Mute
key . Now you can speak freely without the caller being able to hear you.
1. Press the Delete/Mute key
2. The symbol 'X' appears on the display ( X ).
3. When you want to resume the conversation, press the Delete/Mute
again.
4. The symbol 'X' disappears from the display ( X ). The person on the other end
of the line can hear you again.

4.9 Activate/deactivate handsfree function

This function allows you to communicate without having to pick up the handset.
When you are on the phone, press the Up/Handsfree
appears on the display to activate the handsfree function. Press the same
button to deactivate the handsfree function.
Note : When you are calling in handsfree mode and you want to change the
volume, press the Volume button .
(LED) on the base unit will blink. 'EXT' and
to turn off the microphone.
key and the symbol
13 Model:DDP-300
to
key