To Reset Base; To Change Base Pin; Pabx; Flash - Denver DDP-650 Triple User Manual

Press the OK button to confirm, then the display shows LONG?
6.
Press the OK button, the display shows EMPTY, key in the long number
7.
Press the OK button to confirm
8.
To Set Dial Mode
You can change dial mode to TONE or PULSE dialing.
To set dial mode:
Press MENU button, then UP/DOWN button to the location BASE SET
1.
Press the OK button, the display shows PIN?
2.
Key in your PIN number and press the OK button, then press UP/DOWN button to the
3.
location DIAL MODE
Press the OK button and press UP/DOWN button to change Dial mode as TONE or PULSE
4.
dialing

To reset base

Press MENU button, then UP/DOWN button to the location BASE SET
1.
Press the OK button, the display shows PIN?
2.
Key in your PIN number and press the OK button, then UP/DOWN button to the location B
3.
RESET
Press OK button, then the display shows RESET?
4.
Press OK button to confirm, or press CLEAR button, and go back to B RESET
5.

To change base PIN

Press MENU button, then UP/DOWN button to the location BASE SET
1.
Press the OK button, the display shows PIN?
2.
Key in your PIN number and press the OK button, then UP/DOWN button to the location
3.
MAST PIN?
Press OK button, the display shows PIN?, Key in the new PIN number (default PIN:0000)
4.
Repeat the step 4 and the display shows MAST PIN
5.
Press OK button, the display shows PIN?, Key in the new PIN number again
6.
Repeat the step 6, and press OK button to confirm
7.

PABX

With the PABX function, the phone will automatically pause once the initial string of the phone
number matches the PABX code. For example, if the user program to enter "9" as PABX code, then
when he dials "98118118", then the phone will dial "9" first then pause follow by "8118118".
To set PABX number:
Press MENU button, then press UP/DOWN button to the location BASE SET;
1.
Press the OK button, the display shows PIN?;
2.
Key in your PIN number and press the OK button, then UP/DOWN button to the location
3.
PABX?
Press the OK button, the display shows PABX 1?. You may press UP/DOWN button to select
4.
PABX 2
Press the OK button, the display shows EMPTY. Key in the code. The maximum PABX code
5.
length is 5digits.
Press OK button to confirm.
6.

FLASH

With the FLASH function, you may select Short or Long flash time for your PABX. To set FLASH
time:
Press MENU button, then press UP/DOWN button to the location BASE SET;
1.
13