3 INSTALLATION
3.1 Base installation
For installation, do the following:
1 Plug one end of the adaptor into the outlet and the other end into the adapter
jack on the bottom of the telephone.
2 Connect one end of the telephone cord with the wall phone jack and the other
end to the bottom of the telephone.
2 adapter jack
3 adapter outlet
3.2 Handset installation
1 Open the battery compartment (see below).
2 Insert the batteries respecting the (+ and -) polarity.
3 Close the battery compartment.
Put the battery in the compartment, handset subscribe the base unit. Handset unit
number and base unit number appear on LCD display. With one handset and one
base unit the indicator is "1".
3.3 Handset charger
1 Put the handset on the base unit for 15 hours. The Line/Charge indicator (LED)
on the base unit will light up.
1 telephone connection
4 wall phone jack
10
Model:DDP-300