Table of Contents
Advertisement
8 MULTIPLE HANDSET AND BASE OPERATION (OPTIONAL
PURCHASE)
In order to be able to make and receive telephone calls, a new handset has to be
subscribed to the base unit. You can subscribe 5 handsets to one base unit. By
default, each handset is subscribed as handset 1 on the base unit upon delivery
(base unit 1). !!! You only need to subscribe the handset if: !!!
the handset subscription has been removed from the base unit (e.g. for
reinitialisation)
you want to subscribe a different handset to this base unit.
8.1 Subscribing a handset to a base unit
Keep the Paging key
on the base unit pressed for 20 seconds until the
Line/Charge Indicator
on the base unit begins to blink rapidly. The
Line/Charge indicator
will blink rapidly for one minute. During this
minute, the base unit is in subscribing mode and you must do the following to
subscribe the handset:
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Enter a number of the base unit you would like to subscribe the handset to
(1-4).
Note: Each handset can be subscribed to 4 different DECT base units. Each
base unit is assigned a number from 1 to 4 in the handset. When you
subscribe a new handset, you can assign a base unit number. It is best to
use '1' .
5 'SEARCHING' and the symbol
6 The RFPI code (each base unit has a unique RFPI code) appears on the display
and a signal sounds when the handset has found the base unit.
7 Press the Programming key
8 Enter the 4-digit PIN code of the base unit in (default PIN code is '0000').
9 Press the Programming key . The handset is subscribed to the base unit.
.
repeatedly until 'BASE SUB' appears on the
. 'BASE _' appears on the display.
appears on the display.
. 'PIN' appears on the display.
27
Model:DDP-300
Advertisement
Table of Contents
