Changing The Pin Code - Denver DDP-300 User Manual

1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 Enter your PIN code
7 Press the Programming key
8 Press the Up or Down key
number (max. 5 digits) to be barred, e.g. 01486.
9 Press the Programming key
10 Enter the numbers of the handsets from which the barred numbers cannot be
called. e.g. Press the number key 2, 3 and 5. On the display, this will appear:
HS _2 3_5 01486. These handsets can no longer dial numbers beginning with
'01486'.
11 Press the Programming key
confirmation tone.

6.10 Changing the PIN code

Certain functions are only available if you know the PIN code of the telephone.
Thanks to this secret code, settings are displayed that only you can change. The
PIN code has 4 digits.
The default PIN code setting is '0000'. If you would like to change the default
PIN code and set your own secret code, do the following:
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 Press the Up or Down key
display.
5 Press the Programming key
6 Enter the old PIN code. Use the number keys.
7 Press the Programming key
.
repeatedly until 'SETTING' appears on the
.
repeatedly until 'BARRING' appears on the
. PIN' appears on the display.
. 'BAR NUM ' appears on the display.
to select one of the 5 memories. Enter the
. 'HS _ _ _ _ _' appear on the display.
to confirm your selection. You hear a
.
repeatedly until 'SETTING' appears on the
.
repeatedly until 'PIN CODE' appears on the
. 'OLD CODE' appears on the display.
. 'NEW CODE' appears on the display.
22 Model:DDP-300