Transferring A Call To Another Handset; Receiving An External Call During An Internal Call; Conference Call (Two Internal Dect Handsets And One External Caller) - Denver DDP-300 User Manual

appear on the display. The call timer starts running.
3 After finishing your call, press the Line key
back on the base unit.

8.5 Transferring a call to another handset

1 Press the Programming key
2 Press the Programming key
3 The external call is now on hold. 'INT' appears on the display.
4 Dial the number of the handset to which you would like to transfer the call.
5 If the handset dialled is answered, you can have an internal conversation. Press
the Line key and the external call is transferred.
If the handset dialled is not answered, press the Down key
external caller again.

8.6 Receiving an external call during an internal call

If you receive an external call during an internal call, you will hear a call waiting
tone (double beep) on both handsets being used for an internal call.
1 Press the Line key twice to accept the external call.
2 After finishing your call, press the Line key
back on the base unit.
8.7 Conference call (two internal DECT handsets and one external
caller)
You can have a telephone conversation with one internal and one external caller
at the same time.
1 While on the line with an external caller, press the Programming key
2 'INTERCOM' appears on the display.
3 Press the Programming key
4 The external call is now on hold. 'INT' appears on the display.
5 Dial the number of the handset you would like to include in the call.
6 Once the handset dialled is answered, keep the '#' key pressed for 2 seconds.
7 'CONFERENCE' appears on the display.
8 Now you are connected to one external and one internal caller (conference
call).
to hang up or put the handset
. 'INTERCOM' appears on the display.
.
to speak to the
to hang up or put the handset
.
29 Model:DDP-300
.