Table of Contents
Advertisement
7 CALLER ID/CLIP
(This service only works when you have a Caller ID/Clip subscription. Contact
your telephone company). When you receive a call, the telephone number of the
caller, the date and time appears on the handset display. The telephone can
receive calls in both FSK and DTMF. If the name is programmed in the Phone
Book, the name in the Phone Book is displayed!
7.1 Setting the date and time
When you receive an incoming call (FSK system only), the date and time are sent
together with the telephone number, this means that the date and the time will not
be shown on the display. To set year, please do it manually.
1 Press the Programming key
2 Press the Up or Down key
display.
3 Press the Programming key
4 'DATE/TIME' appears on the display.
5 Press the Programming key
6 When 'YEAR' appears on the display, enter the 2 last numbers of the year
(02=2002, 03=2003,...) and press the Programming key
7 When 'MONTH' appears on the display, enter the month (01=January,
02=February,...) and press the Programming key
8 When 'DAY' appears on the display, enter the day of the month and press the
Programming key
to confirm.
9 When 'HOUR' appears on the display, enter the current hour in 24h format)
and press the Programming key
10 When 'MINUTES' appears on the display, enter the minutes and press the
Programming key
to confirm.
11 The date and time are now set.
7.2 The telephone can store 30 calls in a Call List that can be reviewed later.
The telephone never stores the same call twice. When the memory is full, the
new calls automatically replace the oldest calls in the memory. The symbol
on the display blinks if the call is not read or not answered. If the Call List is
empty and you press the Up key
7.3 The Call List
The calls received are stored in the Call List (max. 30 numbers).
.
a few times until 'SETTING' appears on the
.
again.
to confirm.
to confirm.
to confirm.
, three beep tones will sound.
25
Model:DDP-300
Advertisement
Table of Contents
