Base Unit; Installation; Unpacking; Location Of Base Unit - Denver DDP-500 User Manual

INSTALLATION

UNPACKING

In the box you should find the following items:
• Handset

• Base unit

• 3 x NI-MH batteries( re-chargeable types)
LOCATING THE BASE UNIT
It is essential to the overall range and performance that the base unit and handset can receive and
transmit good radio signals.
Place the base unit close to
• Telephone network socket
• AC main socket
The best location is in an upstairs room and central to the area to be covered. If you experience poor
range, Try re-setting the base unit.
• Do not locate direct in sunlight, high humidity locations.
• Do not locate close to: electrical equipment such as TV, computers, fridges, etc., or close to
radiators, metal pipes or window frames.

GETTING CONNECTED

• Remove the battery cover from the bottom of the handset by applying gentle pressure to the bottom
of the cover and pushing away from the unit. Insert the supplied battery, observing correct polarity.
Replace the battery cover.
• Connect the power adaptor plug to the rear of the base unit and to a AC mains socket.
• Connect the telephone line to the rear of the base unit and to telephone network socket
• Powers supply
• Line cord
• User guide
- 5 -