2.4.2 GV-BX1200 Series / 1300 Series / 2400 Series /
3400 Series / 5300
1.
If you are using the auto iris model, plug the iris control cable to the
Auto Iris Connector on the camera.
2.
Connect to network using one of the following methods:
Wired Connection: Use a standard network cable to connect the
camera to your network and optionally connect a USB hard drive
to the mini USB port.
Wireless Connection: Connect a GV-WiFi Adapter (optional
accessory).
3.
Optionally connect a speaker and an external microphone.
4.
Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the Web
interface. See 14.1.1 Video Settings.
5.
Optionally connect to input / output devices or an infrared illuminator.
For details, see 2.5.2 Infrared Illuminator and 2.6 I/O Terminal Block.
24
Figure 2-4