Installation - GeoVision GV-BX120D User Manual

7.4 Installation

You can install the camera to the ceiling or wall. Follow the steps below.
1. Install the sun-shield cover to the camera.
A. Fasten the hexagon screws to the top or bottom of the camera.
IMPORTANT: Do not open the front cover of the camera since
this may impair its resistance to water. The warranty is void if the
seal is broken.
B. Put the sun-shield cover on top of the hexagon screws. For
optimal sun-shield performance, make sure the rear hexagon
screw is at the end of the opening.
90
Hexagon Screws
Figure 7-2
Figure 7-3