Connecting The Camera - GeoVision GV-BX120D User Manual

5. Access the live view. For details, see 14.1. Accessing the Live View.
6. Adjust angles of the camera body based on the live view. Three
shafts can be adjusted. See 6.4.2 Adjusting the Angles.
7. Loosen the camera's cover, adjust the focus of the camera and
optionally insert a micro SD card (SDHC / SDXC for class 6 or above)
into the SD card slot. See 6.4.3 Adjusting Lens and Inserting a
Memory Card.
8. Fasten the camera's cover.
9. Install the sun-shield cover to the Bullet Camera. For details, see
6.4.4 Installing the Sun-Shield Cover.

6.4.1 Connecting the Camera

Wire Definition
The 7-Pin Data Cable provides connections for power, ground, 1 sensor
input, 1 alarm output, audio input and audio output. The wires are
illustrated and defined below:
74
Ethernet (PoE)
Figure 6-4
Digital In (Red)
DC 12V+ / AC 24V + (Brown)
Digital Out (Orange)
DC 12V- / AC 24V - (Black)
GND (Yellow)
Audio In (Red)
Audio Out (Green)