Auto Presetting; Manual Presetting - Sherwood R-977 Operating Instructions Manual

Operations

Auto presetting

1
Select FM by pressing the BAND button on the
front panel or the TUNER button on the remote
control.
• Auto presetting function is available for FM
stations only.
2
Press and hold down the ENTER button for more
than 2 seconds.
• "AUTO MEMORY" flickers and the receiver
starts auto presetting.
•
Up to 30 FM stations will be stored.
•
To stop auto presetting, press the ENTER
button again.
TEST
DISC MENU
DISPLAY
DISPLAY
PURE MONITOR
AUDIO SELECT
SURROUND
Note
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, perform
"Manual presetting" procedure with using "Manual
tuning" operation.
36
SETUP
HOME MENU
ENTER
RETURN
DIMMER
AUDIO SUBTITLE
STEREO

Manual presetting

1
Tune in the desired station with auto or manual
tuning.
2
Press the ENTER button.
• The preset number flickers.
TEST
DISC MENU
DISPLAY
DISPLAY
PURE MONITOR
AUDIO SELECT
SURROUND
3
Select the desired preset number (1~30) by
pressing the TUNING UP(+)/DOWN(−) buttons.
•
The station has now been stored in the
memory.
•
A stored frequency is erased from the memory
by storing another frequency in its place.
SETUP
HOME MENU
ENTER
RETURN
DIMMER
AUDIO SUBTITLE
STEREO
E TE SE ECT
M1 M2 M3
VOLUME ROOM2
INPUT
CH MUTE
CH.LEVEL VOLUME
CH T/V
TUNE TUNE
PRESET PRESET
TEST SETUP