Setup Menu Flow; Amp Assign; Save/Recall Auto Setup - Sherwood R-977 Operating Instructions Manual

OSD Menu Settings

Setup menu flow

SYSTEM SETUP

AMP ASSIGN

RS232 CONTROL
MOMENTARY OSD
SAVE/RECALL
SP/EQ SETUP AUTO SETUP
ROOM EQ
SPK CONFIG
SP X-over
SP DISTANCE
CH LEVEL
INPUT SETUP TUNER CFG.
NET/USB CFG.
BD/BDR CFG.
DVD/DVR CFG.
STB/CBL CFG.
54
SB/FH/R2 / Surr Back / F.Height / ROOM2
PWR ON / ON / OFF
ON / OFF
SAVE1 / SAVE2 / RECAL1 / RECAL2
AMP ASSIGN SB/FH/R2 / SurrBack / F.Height / ROOM2
MEASURE CHANNEL SEL. / SUBWOOFER SEL
START
ON / OFF
FRONT HEIGHT YES / NO
CENTER YES / NO
SURROUND YES / NO
SURROUND BACK 2ch / 1ch / NO
SUBWOOFER 1/2 / 1 / 2 / NO
FRONT FULL / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 200Hz / 250Hz
FRONT HEIGHT FULL / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 200Hz / 250Hz
CENTER FULL / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 200Hz / 250Hz
SURROUND FULL / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 200Hz / 250Hz
SURROUND BACK FULL / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 200Hz / 250Hz
UNIT METER /
FRONT LEFT 0.0 ~ 9.0 (3.0)
F.HEIG LEFT 0.0 ~ 9.0 (3.0)
CENTER 0.0 ~ 9.0 (3.0)
F.HEIG RIGHT 0.0 ~ 9.0 (3.0)
FRONT RIGHT 0.0 ~ 9.0 (3.0)
SURR RIGHT 0.0 ~ 9.0 (1.5)
BACK RIGHT 0.0 ~ 9.0 (1.5)
BACK LEFT 0.0 ~ 9.0 (1.5)
SURR LEFT 0.0 ~ 9.0 (1.5)
SUBWOOFER 0.0 ~ 9.0 (1.5)
MODE CAL / SAVE1 / SAVE2 / REF1 / REF2
FRONT LEFT -15dB ~ +15dB (0dB)
F.HEIG LEFT -15dB ~ +15dB (0dB)
CENTER -15dB ~ +15dB (0dB)
F.HEIG RIGHT -15dB ~ +15dB (0dB)
FRONT RIGHT -15dB ~ +15dB (0dB)
SURR RIGHT -15dB ~ +15dB (0dB)
BACK RIGHT -15dB ~ +15dB (0dB)
BACK LEFT -15dB ~ +15dB (0dB)
SURR LEFT -15dB ~ +15dB (0dB)
SUBWOOFER -15dB ~ +15dB (0dB)
LFE LEVEL DOLBY
DTS
NAME EDIT
DC TRIGGER 1 ON / OFF
DC TRIGGER 2 ON / OFF
NAME EDIT
DC TRIGGER 1 ON / OFF
DC TRIGGER 2 ON / OFF
NAME EDIT
HDMI ASSIGN 1 / 2 / 3 / 4 / 5 / FRONT / NO
VIDEO ASSIGN COMP1 / COMP2 / NO
AUDIO ASSIGN OPT1 / OPT2 / COAX1 / COAX2 / NO
VIDEO MODE AUTO / HDMI / COMP / CVBS
AUDIO MODE AUTO / HDMI / DGTL / ANLG
VIDEO SCALING AUTO / BYPSS / 480p / 720p / 1080i / 1080p
AV SYNC 0ms ~ 200ms
DC TRIGGER 1 ON / OFF
DC TRIGGER 2 ON / OFF
NAME EDIT
HDMI ASSIGN 1 / 2 / 3 / 4 / 5 / FRONT / NO
VIDEO ASSIGN COMP1 / COMP2 / NO
AUDIO ASSIGN OPT1 / OPT2 / COAX1 / COAX2 / NO
VIDEO MODE AUTO / HDMI / COMP / CVBS
AUDIO MODE AUTO / HDMI / DGTL / ANLG
VIDEO SCALING AUTO / BYPSS / 480p / 720p / 1080i / 1080p
AV SYNC 0ms ~ 200ms
DC TRIGGER 1 ON / OFF
DC TRIGGER 2 ON / OFF
NAME EDIT
HDMI ASSIGN 1 / 2 / 3 / 4 / 5 / FRONT / NO
VIDEO ASSIGN COMP1 / COMP2 / NO
* The setting values in
are the default settings.
* The main and sub menus
may vary according to the
AMP assignment, speaker
configuration, etc.
FEET
0.5 ~ 30.0 (10.0)
0.5 ~ 30.0 (10.0)
0.5 ~ 30.0 (10.0)
0.5 ~ 30.0 (10.0)
0.5 ~ 30.0 (10.0)
0.5 ~ 30.0 (5.0)
0.5 ~ 30.0 (5.0)
0.5 ~ 30.0 (5.0)
0.5 ~ 30.0 (5.0)
0.5 ~ 30.0 (5.0)
-10dB ~ 0dB
-10dB ~ 0dB