Listening To Radio Broadcasts; Auto/Manual Tuning - Sherwood RX-4105 Operating Instructions Manual

LISTENING TO RADIO BROADCASTS

Auto tuning
.
1
Select the tuner and then the desired band.
• Each time this button is pressed, the band is changed to
FM or AM.
.
2
Select the tuning mode.
• Each time this button is pressed, the mode changes
as follows:
.
3
Press the TUNING/PRESET UP(¡ ã ) or
DOWN(¡ å ) button for more than 0.5 second.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
Manual tuning
• Manual tuning is useful when you already know the
frequency of the desired station.
• Perform the steps 1 and 2 in "Auto tuning" procedure
and press the TUNING/PRESET UP(¡ ã ) or DOWN(¡ å )
button repeatedly until the right frequency has been
reached.
Presetting radio stations
• You can store up to 30 preferred stations in the
memory.
.
1
Tune in the desired station with auto or
manual tuning.
.
2
Press the MEMORY button.
• "MEM" is flickering for 5 seconds.
12