Inserting The Batteries - Sherwood R-977 Operating Instructions Manual

Inserting the batteries

1
Remove the cover.
Caution
• Remove the batteries when they are not used for a long time.
• Always use alkaline batteries, and do not use the rechargeable batteries (Ni-Cd type).
• If the batteries ran out, remove the old batteries and replace them with new ones within several minutes. If the batteries
are removed or have been exhausted for a longer period of time, memorized contents will be cleared. In this case, you
should memorize them again.
Operating range of remote control
Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the
remote control sensor.
2
Insert two AAA size 1.5v alkaline batteries matching
the polarity.
Preparations
11