Seat elevator
Seat elevator
Manual Raising/
Lowering of the Seat elevator
If the seat elevator does not work normally
because the batteries are discharged or the
actuator
is
defective,
raised/lowered manually.
1. Switch off the main power switch on the
control panel.
2. Remove the cushion and plastic plugs from
the seat.
3. Raise/lower the seat using the seat elevator
crank supplied. See figure.
WARNING
Drills must not be used in connection with manual operation of
the seat elevator. There is a risk of damage to materials.
the
seat
can
be
30
Manual Raising/Lowering of the Seat elevator