Check The Contents Of Package - Hamamatsu Photonics C11440-22C Insctruction Manual

2. CHECK THE CONTENTS OF PACKAGE

When you open the package, check that the following items are included before use. If the
contents are incorrect, insufficient or damaged in any way, contact your local dealer without
attempting to operate the camera.
C11440-22C camera
AC adaptor
Power supply cord for AC adaptor
Lens mount cap
C11440-22C Before Use (This Booklet)
C11440-22C Instruction manual (CD-ROM)
[Option]
Circulating water cooler
Cooling water hose (2 hoses)
External trigger cable for SMA-BNC
External trigger cable for SMA-SMA
CameraLink interface cable
Adjuster pole
Base plate
CameraLink interface board
The cable listed in option is highly recommended for use with the camera. The camera
•
Note
system may not confirm to CE marking regulation if other type of cable is used with.
The cooling is set as air cooling at factory setting.
•
Note It is possible to change the cooling setting from Air cooling to Water cooing by the special
software included.
Handle the circulating water cooler and the cooling water according to an instruction
•
manual of the circulating water cooler.
If you use the adjuster pole and the base plate, see each installation manual.
Note
•
(attached to the camera)
C11440-22C Instruction manual_Ver.1.4
1
1
1
1
1
1
C3142-07
A10788-04
A12106-05
A12107-05
A11255-05
A11185-01
A11186-01
M9982-20
5