C11440-22C Instruction manual_Ver.1.4
6. NAME AND FUNCTION OF THE PARTS
①
CAUT ION
① Lens mount
C-mount lens or an optics system with C-mount can be attached.
Note
② WATER connector [WATER] (at Water-cooling)
This is for coolant. It connects the camera and the cooler for circulating water with the cooling
water hoses. The insert position of WATER IN/OUT is not specified.
CAUT ION
③ CameraLink interface connector [DIGITAL OUT 1]
This is connected to the connector 1 of CameraLink interface board in the host computer.
④ CameraLink interface connector [DIGITAL OUT 2]
This is connected to the connector 2 of CameraLink interface board in the host computer.
12
Place the camera the water connectors to be lateral side. Do not place
•
the camera the rear panel of the camera, which connectors are located,
to be at the bottom (Do not block ventilation openings.).
The depth of the C-mount is 7 mm. Screwing in the mount too far
•
can scratch the glass surface.
Please see 8. [Water cooling] for details.
•
⑪
Figure 6-1
②
④
③ ⑤ ⑥
⑦ ⑧ ⑨ ⑩