Connect The Printer To The Computer - Kyocera FS-6700 User Manual

1.4. Setting Up and Interfacing

9. Connect the Printer to the Computer

1-24
The printer has two computer cable connectors and a slot for installing an option interface. The one
marked " " is for a parallel (Centronics standard) interface. The one marked "IOIOI" is for a serial
(RS-232C/RS-422A) interface. You may use whichever is convenient for your computer, with the
option interface, if you have already have one installed. All interface connectors can be used
simultaneously with different computers.
Option Interface/Hard Disk Unit
Slot Cover (OPT2)
Parallel Interface
Connector ( )
Serial (RS-232C/RS-422A) Interface
Connector (IOIOI)
Note
Only connect or disconnect cables to the connectors while the printer and computer power are
switched off.
Option Interface Slot
Cover (OPT1)