Connect The Printer To The Computer - Kyocera DP-3600 Instruction Handbook Manual

9.

Connect the printer to the computer.

CAUTION
Before performing this step, be sure to turn off the printer's power switch
and unplug the power plug from the power outlet. Failure to do so may
result in electric shock.
A standard Centronics parallel interface connector (
connector (IOIOI) are located on the rear side of the printer. For pin connections, please refer to
Appendix C.
Setup and Connections
) and RS-232C/RS-422A serial interface
Parallel Interface Connector (
Serial Interface (RS-232C/RS-422A)
Connector (IOIOI)
)
1- 25