Resource Protection - Kyocera FS-6700 User Manual

2.11. Resource Protection

When you switch from the HP LaserJet 5M emulation to another, all downloaded fonts and macros
are lost. Resource protection preserves these PCL resources in memory so that they are intact
when you change the emulation back to HP LaserJet 5M.
By using the printer's >Resource prot., you can select from two resource protection modes as
follows:
>Resource prot.
Permanent
In this mode, the printer stores fonts, macros, symbol sets, etc. in memory that were downloaded
as permanent PCL resources. All temporary resources are lost when the emulation mode is
changed from HP LaserJet 5M to another or vice versa.
>Resource prot.
Perm / Temp
In this mode, the printer stores both permanent and temporary resources when the emulation
mode is changed from HP LaserJet 5M to another or vice versa.
Note
The printer requires 10 MB or more of memory in order to set resource protection. (14 MB or more
is required when a DU-25 duplexer is installed.)
Chapter 2 Operating the Laser Printer
2-35