Kyocera FS-6700 User Manual page 116

5. Press the FORM FEED key. The printer will automatically print the data just written (example
below). This printout can be used to check the name (partition name) under which data was
written and confirm that it was written properly.
Slot number: Slot name for the memory card (only A is supported)
Data type: Data type (only 2 is supported)
Partition name: Name of the partition (data) written
Write data length: Size of the partition data written (in units of bytes)
After printing is finished, the message display will return to Ready.
Chapter 2 Operating the Laser Printer
2-47