Selecting Resource Protection Mode - Kyocera FS-6700 User Manual

2.11. Resource Protection

Selecting Resource Protection Mode

2-36
1. Pressing the MODE key will put the printer in Mode Select mode.
2. Press + or – to select Others >.
3. Press the key.
4. Press the + or – key to display >Resource prot. and then press the ENTER key. A ? will
flash and the current setting can be changed.
5. Press the + or – key and select the desired setting.
6. Press the ENTER key.
If you want to change the setting, press the CANCEL key before pressing the ENTER key.
7. Press the EXIT key. The Resource Protection mode setting is now changed.