Open The Paper Stopper On The Face-Down Output Tray (If Required); Install The Face-Up Output Tray (Sold Separately) - Kyocera FS-6700 User Manual

7. Open the Paper Stopper on the Face-down Output Tray (if required)

8. Install the Face-up Output Tray (sold separately)

Open the paper stopper as shown below.
Paper Stopper
Note
Depending on the paper, printing without opening the paper stopper may result in more evenly
aligned output. Decide whether or not to use the paper stopper after checking the output condition
of paper.
Use the separately sold PT-3 face-up output tray if you want the printed pages stacked face-up
(reverse order). Install the face-up output tray as shown in the figure.
Face-up Output Tray (PT-3)
Chapter 1 Installing the Page Printer
1-23