Boot Settings Screen - Dell PowerEdge C4130 Owner's Manual

Menu Item
Drive Type
Capacity
Port C
Model
Drive Type
Capacity
Port D
Model
Drive Type
Capacity
Port E
Model
Drive Type
Capacity
Port F

Boot Settings screen

You can use the Boot Settings screen to set the Boot mode to either BIOS or UEFI. It also allows you to
specify the boot order.
To view the Boot Settings screen click System Setup Main Menu → System BIOS → Boot Settings.
Menu Item
Boot Mode
26
Description
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Description
Enables you to set the boot mode of the system.