Table of Contents
Advertisement
Cable routing clip
Removing the cable routing clip
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Disconnect and remove the cables routed through the cable routing clip.
4.
Keep the Phillips #2 screwdriver ready.
Steps
1.
Remove the screws securing the cable routing clip to the system board.
2.
Lift the cable routing clip away from the system board.
Figure 42. Removing and installing the cable routing clip
1.
cable routing clip
3.
screw hole on the system board
Safety
instructions.
Before working inside your
system.
2.
screw (2)
101
Advertisement
Table of Contents
Troubleshooting
