About The Poweredge C4130 System; Supported Configurations On Poweredge C4130 Systems; Customer And Field Replaceable Units - Dell PowerEdge C4130 Owner's Manual

About the PowerEdge C4130 system

The Dell PowerEdge C4130 rack servers support up to:
• Two Intel Xeon E5-2600 v3 processors
• Sixteen DIMMs
• Four 2.5 inch hard drives (optional)
• Two 1.8 inch solid state drives (SSDs)
• Two power supply units (PSUs)
• Four graphics processing units (GPUs)
NOTE: All GPU cards must be of the same type and model. Mixing GPUs is not supported.
NOTE: The PSU 2 slot also functions as the optional 2.5 inch hard drive cage slot. If you install the
optional 2.5 inch hard drives, your system will not support the redundancy feature.

Supported configurations on PowerEdge C4130 systems

Table 1. Supported configurations
PowerEdge C4130 Configuration type Description
systems
Configuration A
Single processor
systems
Configuration E
Configuration B
Dual processor
systems
Configuration C
Configuration D
NOTE: Incorrect removal and installation of the GPUs will cause operational issues to your system.

Customer and field replaceable units

The following components are Customer Replaceable Units (CRUs):
• Cooling fans
8
Supports four GPUs and a GPU switch board.
Supports two GPUs but does not support a GPU switch
board.
Supports four GPUs and a GPU switch board.
Supports four GPUs but does not support a GPU switch
board.
Supports two GPUs but does not support a GPU switch
board.
.
1