Quick Start Guide for ELDES EPIR users
In this guide you will learn how to quickly set and run EPIR device manually
(using SMS messages for programming). Here are the most important steps:
1. Place SIM card in the holder.
Make sure that PIN code at SIM card is disabled
2. Connect antenna and
plug power supply connector to the device.
Plug power supply to mains socket.
the SIM card inserted in EPIR device.
4. Change the default password to a new one.
Send following SMS message:
0000_PSW_XXXX
In place of XXXX you should enter your new 4 digital password.
All other messages for programming must start with this password.
Underscore symbol '_' in this manual is used to represent space typing.
5. Upload up to five different user mobile numbers
Send the SMS message with the following text
XXXX_NR1:4411111111_NR2:4411111111_NR3:4411111111_NR4:4411111111_NR5:4411111111
It is not necessarily to enter all 5 users at once – start by entering the first one (NR1) with your own or
preferred mobile number. The other ones can be added later (NR2, NR3, NR4 or NR5 users).
Send following SMS message:
XXXX_MMMM.mn.dd_va:mi
where MMMM means year, mn – month, dd – day, va – hour, mi – minutes.
*1 - PIN code can be disabled by putting SIM card into mobile phone and following proper menu. *2 User must type mobile number in the interna-
tional format (it consist of only those digits that overseas callers must type: 44<area code><local number>) without symbol '+' . E.g. the mobile number
of user is +44 (0) 113 xxx xxxx, so the correct format to type is 44113xxxxxxx and the wrong ones – 440113xxxxxxx or 0113xxxxxxx *3 - device will use
controll preferences installed by manufacturer. It can be changed by user at any time.
.
*1
by sending SMS message EN to the mobile number of
:
*2
which will have access to control the system.
*3
EN
0000 PSW
1234
1234 NR1:44
1111111 NR2
:4411111112
1234 2010.0
2.03 20:15
Need help?
Do you have a question about the EPIR and is the answer not in the manual?
Questions and answers