Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eldes EWK2
Summary of Contents for Eldes EWK2
- Page 1 EWK2/EWK2A WIRELESS KEYFOB...
-
Page 2: Technical Specifications
By default, one pair of buttons is already configured to arm and disarm the alarm system. It is possible to connect up to 5 EWK2/EWK2A devices to ELDES alarm system at a time. The maximum wireless connection range is 150m (492.13ft) (in open areas). - Page 3 Remove the screw located on the back side of EWK2/EWK2A enclosure. 2. Open the enclosure. 3. Once the enclosure is opened, remove the PCB from the EWK2/EWK2A enclosure and flip the PCB so that the back side would be facing up. EWK2/EWK2A Manual v.1.2...
- Page 4 6. Pair the device with the alarm system using ELDES Configuration Tool software. Open Wireless Device Management section and enter a 8-digit wireless device ID located on the EWK2/EWK2A enclosure and press Add button. The device can also be paired by send- ing a corresponding command via SMS message.
-
Page 5: Battery Replacement
By default, EWK2A keyfob supports a Panic Button feature allowing to cause an alarm at any time when the keyfob button is pressed. EWK2 keyfob may support a Panic Button feature as well. This feature that can be configured using ELDES Configuration Tool software by creating a virtual zone of Panic/Silent or 24-Hour type and assigning it to Virtual Alarm option. -
Page 6: Additional Information
“ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system. “ELDES UAB” liability according to local laws does not exceed value of the purchased system. “ELDES UAB” is not affiliated with any of the cellular provi- ders therefore is not responsible for the quality of cellular service. - Page 7 EWK2/EWK2A Manual v.1.2...
- Page 8 Made in the European Union www.eldes.lt...
Need help?
Do you have a question about the EWK2 and is the answer not in the manual?
Questions and answers