Operating Instructions Cappuccino 1. Place your cup / mug under the milk / coffee spout on the right. Turn the milk selector to the foam milk position – See diagram below. 3. Press the cappuccino key. Your cappuccino will now be poured Flat white 1.
Page 4
Cleaning Products – Jura Impressa XF50 Daily See procedure – Daily milk system clean Must be performed at the end of each day just before the machine is turned off Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways Use Cafetto daily milk cleaner –...
Page 5
Daily milk system clean 1. Fill a cleaning jug with 250 ml of cold water and add 15ml of cappuccino cleaning solution. 2. Lift the milk pipe up out of the cooler and place it into the cleaning jug. Place the second cleaning jug under the steam outlet.
Page 6
Weekly milk system clean Complete this procedure once a week after the daily milk system clean 1. Remove the automatic milk frother from the machine. (Fig 1 - 2) 2. Separate the automatic milk frother into 4 parts. (Fig 3) 3.
Page 7
ADD TABLET EMPTY TRAY These short instructions do not replace the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
Page 8
These short instructions do not replace AGENT IN TANK the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
Page 9
DE-SCALING READY CLOSE TAP DE-SCALING EMPTY TRAY...
Page 10
FILTER RINSING CLOSE TAP These short instructions do not replace the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
Troubleshooting: Milk flow No milk flow Milk spluttering Not filling cups Froth milk is flat & cool Solution: 1. Remove the air suction. (Fig 1) 2. Check the valve on the tip of the air suction is clean and is able to open and close freely. Squeeze the valve between your figures, it should open, release it and it should close.
Page 12
Welcome to My Coffee Shop! Our hours of operation are Monday – Friday 9am to 5pm. Or you can visit us at your convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can be placed by: Phone: 1300 365 487 02 9692 8046 Fax: E-mail:...