Advertisement

IMPRESSA X
50
F
Short operating instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the impressa xf50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jura impressa xf50

  • Page 1 IMPRESSA X Short operating instructions...
  • Page 2: Control Elements

    Control elements Rotary Switch 15/16...
  • Page 3 Control elements 1. Rotary Switch 2. Illuminated ring 3. ON/OFF key 4. Programming key 5. Draw-off key 1 cup 6. Draw-off key 2 cups 7. Maintenance key 8. Steam pre-selection key 9. Display dialog system 10. Water tank with carrying handle 11.
  • Page 4: First Use

    First use Press power switch (I) (on rear) Fill bean tank Press ON / OFF key Display text: SPRACHE - DEUTSCH Turn the Rotary Switch until the required language is displayed Confirm selected language by pressing the Rotary Switch Lift out water tank Fill water tank and place back into the machine Display text: OPEN TAP...
  • Page 5 Insert filter (first use) Remove water tank and empty it Flip up cartridge (1) holder Insert filter cartridge (2) into water tank, applying slight pressure Close cartridge holder (1) (engages audibly) Fill water tank and insert Hold programming key P down until the display shows FILTER Confirm setting by pressing the Rotary Switch Turn Rotary Switch until the display shows...
  • Page 6 Empty drip and grounds tray and place back into the machine Place a receptacle (ca. 1 litre) under the the coffee spout Press maintenance key Drop a original JURA cleaning tablet into the filler funnel for ground coffee when display prompts you to do so Close lid...
  • Page 7: Changing The Filter

    Changing the filter Display text: READY - FILTER NOTE: After having used 50 litres of water or after two months at the latest, the filter cartridge will be used up. Switch machine off using the ON / OFF key Press maintenance key until the display shows: CHG FILTER —...
  • Page 8 Decalcifying (duration: approx. 40 minutes) Display text: READY - CALCIFIED Switch machine off using the ON / OFF key Hold maintenance key down until the display shows EMPTY — TRAY Empty drip and grounds tray and place back into machine Remove Easy-Auto-Cappuccino Frother or hot water nozzle Remove water tank and empty it Completely dissolve contents of a blister (3 tablets) in 0.6 litres of...
  • Page 9 Decalcifying (continuation) Empty drip and grounds tray and place back into machine when display prompts you to do so Rinse water tank well, fill with cold, fresh tap water and place it back into the machine Place receptacle under spout Turn tap to position Turn it back to the initial position when display prompts you to do so Empty drip and grounds tray and place back into machine...
  • Page 10: Rinsing The Easy-Auto-Cappuccino Frother

    Rinsing the Easy-Auto-Cappuccino Frother To ensure perfect function, the Easy-Auto-Cappuccino Frother should be rinsed regularly. Dismantle the Easy-Auto-Cappuccino Frother into its individual parts Thoroughly rinse all parts of the nozzle under running water Reassemble the Easy-Auto-Cappuccino Frother Cleaning the Easy-Auto-Cappuccino Frother To ensure perfect function, the Easy-Auto-Cappuccino Frother should be cleaned regularly Place a receptacle under the Easy-Auto-Cappuccino Frother...
  • Page 11 www.jura.com...

Table of Contents