Operating Instructions – Jura XF50 fine foam Cappuccino 1. Place your cup / mug under the milk / coffee spout on the right. Turn the milk selector to the foam milk position – See diagram below. 3. Press the cappuccino key. Your cappuccino will now be poured Flat white 1.
Page 4
Jura Impressa Xf50 – End of Day cleaning 1. Fill a cleaning jug with 250 ml of cold water and add 15ml of cappuccino cleaning solution. 2. Lift the milk pipe up out of the cooler and place it into the cleaning jug. Place the second cleaning jug under the steam outlet.
Page 5
2. Separate the automatic milk frother into 4 parts. (Fig 3) 3. Soak the parts in 250ml of warm water (not hot) and 15ml of Jura cappuccino cleaner for 15 – 20 min (max). 4. Remove the parts from the solution and rinse them under cold tap water.
Page 6
ADD TABLET EMPTY TRAY These short instructions do not replace the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
Page 7
These short instructions do not replace AGENT IN TANK the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
Page 8
DE-SCALING READY CLOSE TAP DE-SCALING EMPTY TRAY...
Page 9
FILTER RINSING CLOSE TAP These short instructions do not replace the ‘IMPRESSA XF50 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards. JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com...
5. Separate the auto frother into 4 parts. (Fig 5) 6. Soak the parts in 250ml of warm water and 15ml of Jura cappuccino cleaner for 15 – 20 min. 7. Remove the parts from the solution and rinse them under tap water.
Page 11
Trouble shooting: Steam No steam Low steam Steam coming from the wrong location Solution: 1. Unplug the machine for 10 seconds, plug the machine back in, turn it on and test the milk function. If the problem has not been resolved go to step 2. 2.
Need help?
Do you have a question about the Impressa XF50 and is the answer not in the manual?
Questions and answers