Emulation Selection - Kyocera FS-7000 User Manual

Reduction (Page Set)

Emulation Selection

2-28
The following emulations can be selected for this printer. The emulation selected is stored even while
the printer's power is off.
Line printer
IBM Proprinter
Diablo 630
Epson LQ-850
HP LaserJet 5Si (Default setting)
KC-GL
KC-GL Emulation
The following settings can be made from the sub-menu when KC-GL emulation is selected.
Display
> KC-GL Pen width
> KC GL Page set
Description
The width of pens (1) through (8) can be set in 1-dot increments from 01 to
99. After selecting the pen on this sub-menu, you can also display and select
the width set for that pen on a lower menu.
Any of the following page sizes can be set: A2, A1, A0, B3, B2, B1,
B0, SPSZ (custom size specified using the SPSZ command). The selected
page size will be automatically reduced to the actual paper size being used.