Cables And Power Supplies; Data Cables; Usb Cable; Network Cable - DataCard SD260 Installation And Administration Manual

Cables and Power Supplies

The printer uses the following data cables and power supplies.

Data Cables

The data cable connects the printer to the network or directly to a PC. You can
use one of the following data cables:
USB
•
Network (Ethernet)
•
Use only one type of data cable with a printer. If you need to connect more than
one PC to a printer, use a network connection.

USB Cable

Use a USB data cable, 6 feet (2 meters) long, to connect
the printer to the PC. Be sure to use a cable rated for
USB 2.0 data transmission.

Network Cable

Use a standard Ethernet network cable, also called a Category 5 or Cat 5 cable, to
connect the printer to a network port.
Ethernet cables are not available from Datacard. You can purchase a cable from a
third‐party supplier.

USB Smart Card Cable

Use a USB cable up to a maximum of 6 feet (2 meters) long to connect the smart
card port to the PC.

Power Supplies

You can order the following power supplies:
Printer—The printer power supply is rated at
•
100–240 VAC, 50–60 Hz and uses up to 3 amps. It
is self‐adjusting within the rated input voltage.
90 Supplies and Parts