Connect the USB Cable
You can connect the system to a Windows‐based
PC using a USB cable.
1.
Connect one end of the USB cable to the USB
port of the printer
2.
Connect the other end to a USB port on the
PC.
3.
Refer to the printer's Driver Guide to set up
the Card Printer Driver to work with the
system.
Connect the Network Cable
You can connect the system to a
Windows‐based PC on a network using an
Ethernet cable (the cable is not supplied with
the system).
1.
Connect one end of the Ethernet cable to
the top port on the printer.
2.
Connect the other end to a network port.
3.
Refer to the printer's Driver Guide to set up
the Card Printer Driver to work with the
system.
A-8
SD460 Laminating System